Rolandow op 17 apr 2013 om 14:27

2013-04-17T14:27:53Z

Rolandow: Nieuwe pagina aangemaakt met '= examples of exclude list =

        Here are some examples of exclude/include matching:         o      "- *.o" would exclude all names matching *.o         o   …'

2011-06-30T13:08:24Z

Nieuwe pagina aangemaakt met '= examples of exclude list = <pre> Here are some examples of exclude/include matching: o "- *.o" would exclude all names matching *.o o …'

Nieuwe pagina

= examples of exclude list =

<pre>
Here are some examples of exclude/include matching:

o "- *.o" would exclude all names matching *.o

o "- /foo" would exclude a file (or directory) named foo in the transfer-root directory

o "- foo/" would exclude any directory named foo

o "- /foo/*/bar" would exclude any file named bar which is at two levels below a directory named foo in the transfer-root directory

o "- /foo/**/bar" would exclude any file named bar two or more levels below a directory named foo in the transfer-root directory

o The combination of "+ */", "+ *.c", and "- *" would include all directories and C source files but nothing else (see also the --prune-empty-dirs option)

o The combination of "+ foo/", "+ foo/bar.c", and "- *" would include only the foo directory and foo/bar.c (the foo directory must be explicitly included or it would be excluded by the "*")

The following modifiers are accepted after a "+" or "-":

o A / specifies that the include/exclude rule should be matched against the absolute pathname of the current item. For example, "-/ /etc/passwd" would exclude the passwd file any time the transfer was sending files from
the "/etc" directory, and "-/ subdir/foo" would always exclude "foo" when it is in a dir named "subdir", even if "foo" is at the root of the current transfer.

o A ! specifies that the include/exclude should take effect if the pattern fails to match. For instance, "-! */" would exclude all non-directories.

o A C is used to indicate that all the global CVS-exclude rules should be inserted as excludes in place of the "-C". No arg should follow.

o An s is used to indicate that the rule applies to the sending side. When a rule affects the sending side, it prevents files from being transferred. The default is for a rule to affect both sides unless
--delete-excluded was specified, in which case default rules become sender-side only. See also the hide (H) and show (S) rules, which are an alternate way to specify sending-side includes/excludes.

o An r is used to indicate that the rule applies to the receiving side. When a rule affects the receiving side, it prevents files from being deleted. See the s modifier for more info. See also the protect (P) and risk
(R) rules, which are an alternate way to specify receiver-side includes/excludes.

o A p indicates that a rule is perishable, meaning that it is ignored in directories that are being deleted. For instance, the -C optionâs default rules that exclude things like "CVS" and "*.o" are marked as perishable,
and will not prevent a directory that was removed on the source from being deleted on the destination.
</pre>

← Oudere versie		Versie van 17 apr 2013 om 14:27
Regel 36:		Regel 36:
	and will not prevent a directory that was removed on the source from being deleted on the destination.		and will not prevent a directory that was removed on the source from being deleted on the destination.
	</pre>		</pre>
		+
		+
		+	= incremental backup script =
		+
		+	Script to run incremental backups, based on this article: [http://www.mikerubel.org/computers/rsync_snapshots/ http://www.mikerubel.org/computers/rsync_snapshots/]
		+
		+	<source lang="bash">
		+	#!/bin/bash
		+	#
		+	# Create incremental backups of code directories
		+	#
		+	ionice -c3 -p$$
		+
		+	LOCKFILE=/var/run/rsync_backup.pid
		+	LOGFILE=/var/log/rsync_backup.log
		+	BACKUP_ROOT=/backup
		+	DAILY_ROTATE=6
		+	MONTHLY_ROTATE=12
		+
		+	f_LOG() {
		+	echo "`date`: $@" >>$LOGFILE
		+	echo "`date`: $@"
		+	}
		+
		+	if [ -e "$LOCKFILE" ];
		+	then
		+	f_LOG "Process is already running at $(cat $LOCKFILE)"
		+	exit 1
		+	else
		+	echo $$ >$LOCKFILE
		+	fi
		+
		+	f_LOG "Start of backup at PID $$"
		+
		+	webdirs=`grep DocumentRoot /etc/apache2/sites-enabled/* \| grep -v 000-default \| awk '{ print $3 }'`
		+
		+	for webdir in $webdirs
		+	do
		+	f_LOG "Backing up directory $webdir"
		+	for (( i=$DAILY_ROTATE; i>=0; i-- ))
		+	do
		+	if [ "$i" -eq "$DAILY_ROTATE" ]; then
		+	if [ -e $BACKUP_ROOT/daily$webdir.$i ]; then
		+	rm -rf $BACKUP_ROOT/daily$webdir.$i
		+	fi
		+	continue
		+	fi
		+
		+	if [ -e $BACKUP_ROOT/daily$webdir.$i ]; then
		+	mv $BACKUP_ROOT/daily$webdir.$i $BACKUP_ROOT/daily$webdir.$((i+1))
		+	fi
		+
		+	if [ "$i" -eq "0" ]; then
		+	mkdir -p $BACKUP_ROOT/daily$webdir.$i
		+	rsync -a --delete --link-dest=$BACKUP_ROOT/daily$webdir.$((i+1)) $webdir/ $BACKUP_ROOT/daily$webdir.$i/
		+	fi
		+	done
		+
		+	if [ "$(date +%d)" -eq "1" ]; then
		+	f_LOG "Doing monthly rotate"
		+	for (( i=$MONTHLY_ROTATE; i>=0; i-- ))
		+	do
		+	if [ "$i" -eq "$MONTHLY_ROTATE" ]; then
		+	if [ -e $BACKUP_ROOT/monthly$webdir.$i ]; then
		+	rm -rf $BACKUP_ROOT/monthly$webdir.$i
		+	fi
		+	continue
		+	fi
		+
		+	if [ -e $BACKUP_ROOT/monthly$webdir.$i ]; then
		+	mv $BACKUP_ROOT/monthly$webdir.$i $BACKUP_ROOT/monthly$webdir.$((i+1))
		+	fi
		+
		+	if [ "$i" -eq "0" ]; then
		+	mkdir -p $BACKUP_ROOT/monthly$webdir.$i/
		+	rsync -a --delete --link-dest=$BACKUP_ROOT/monthly$webdir.$((i+1)) $webdir/ $BACKUP_ROOT/monthly$webdir.$i/
		+	fi
		+	done
		+	fi
		+	done
		+
		+	rm $LOCKFILE
		+
		+	f_LOG "End of backup"

Linux rsync - Bewerkingsoverzicht

Rolandow op 17 apr 2013 om 14:27

Rolandow: Nieuwe pagina aangemaakt met '= examples of exclude list =
Here are some examples of exclude/include matching: o "- .o" would exclude all names matching .o o …'